Instrument Panel - Electronic
- Description & Operation
- Testing
- Notes
- Hazard Warning Switch Test
- Headlight Switch Test
- Function Diagnostic Mode
- Pinpoint Tests
- Notes
- Pinpoint Test AH Outside Temperature Always Indicates 135-140°F (57-60°C)
- Pinpoint Test AL Outside Temperature Always Indicates -40°F (-40°C)
- Pinpoint Test AS Outside Temperature Wrong, Not To Extreme High Or Low
- Pinpoint Test FA Instantaneous Fuel Economy Or Average Fuel Economy Always Indicates 0 Miles/Gallon Or 99L/100 KM Or 99 Miles/Gallon Or 0 L/100 KM
- Pinpoint Test FB Trip Distance Does Not Accumulate
- Pinpoint Test FC Distance To Empty (DTE) Does Not Go Below 200 Miles With Fuel Tank Empty
- Pinpoint Test FD CO Displayed, Gauge Blanks Out Fuel Tank Symbol, Lights 2 Top & 2 Bottom Bars Of Fuel Gauge
- Pinpoint Test FE CS Displayed, Gauge Blanks Out Fuel Tank Symbol, Lights 2 Top & 2 Bottom Bars Of Fuel Gauge
- Pinpoint Test FF Inaccurate Fuel Indication - Full Not Indicated When Tank Is Full Or Empty Not Indicated When Tank Is Empty
- Pinpoint Test FG Fuel Gauge Displays Only 2 Top & 2 Bottom Bars
- Pinpoint Test SA Display Does Not Respond To Buttons - No Beep Sound When Buttons Pressed, No Driver Alert Sounds
- Pinpoint Test SB Speedometer Indicates 0 MPH At All Speeds When Vehicle Is In Motion
- Pinpoint Test SC Speedometer Always Indicates Too High Or Too Low
- Pinpoint Test SD Speed Indication Varies Erratically
- Pinpoint Test SE Odometer Displays "Error"
- Pinpoint Test SF Odometer Displays "S" Message
- Pinpoint Test SG Odometer Does Not Accumulate Mileage Or Accumulates One Mile & Then Jumps Backward
- Pinpoint Test SH Mileage Always Indicates Too High Or Too Low
- Pinpoint Test SJ Speed Control Indicator In Instrument Cluster Is Always On
- Pinpoint Test SK Speed Control Indicator In Instrument Cluster Does Not Come On
- Pinpoint Test TA Display Not Lit, Too Dim Or Totally Blank
- Pinpoint Test TB Display Scrambled, Segments Half Lit, Segments Blinking Or Missing, Display Incorrect, Display Stuck With All Segments On
- Pinpoint Test TC Temperature Gauge Display Blanks Out Thermometer Symbol, Displays 2 Top & 2 Bottom Bars
- Pinpoint Test TD Temperature Gauge Always Indicates Cold Temperature (Bottom Bar Lit)
- Pinpoint Test TX No Warning Tone When Thermometer Symbol Is Blinking
- Pinpoint Test WA Ground Inputs Warning Never Comes On Or Always Comes On
- Pinpoint Test WB Battery Input Warning Never Comes On Or Always Comes On
- Pinpoint Test WC - Display Stuck In English Mode
- Pinpoint Test WD - Display Stuck In Metric Mode
- Removal & Installation
- Wiring Diagrams