LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Oil Pressure Gauge Check

Oil Pressure Gauge Check

  1. Ground Yellow/Red wire at instrument cluster 8-pin connector. See Figure . Instrument cluster 8-pin connector is located on right side of dash, near steering column.
  2. Observe oil pressure gauge reading. If oil pressure gauge reads high, go to OIL PRESSURE GAUGE CONTINUITY CHECK 1  .
  3. If oil pressure gauge does not read high, replace oil pressure gauge.
scientia non olet · About LEMON Manuals