LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Standard >> Testing >> Oil Pressure Gauge Continuity Check 1

Oil Pressure Gauge Continuity Check 1

  1. Ground Yellow/Red wire at oil pressure sending unit connector. Oil pressure switch connector is located on right side of engine behind alternator.
  2. If oil pressure gauge reads high, replace oil pressure sending unit. If oil pressure gauge does not read high, repair Yellow/Red wire between gauges and oil pressure sending unit.
scientia non olet · About LEMON Manuals