Panel, Cowl Trim, Side: Removal
- Remove the lower B-pillar trim panel. Refer to PANEL, B-PILLAR TRIM, UPPER, REMOVAL .
- With the use of (special tool #C-4829A, Remover, Trim) or equivalent, remove the retainer (1) from the rear of the cowl trim side panel (2).NOTE:
Hood release handle is on driver side only.
- With the use of a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the hood release handle (1).
- Remove the fastener (2) from the cowl trim side panel (1).
- Partially remove the door opening weatherstrip (2) along the cowl trim side panel (1).
- With the use of a trim stick (special tool #C-4755, Trim Stick) or equivalent, release the inner retainers of the cowl trim side panel (1).
- Remove the cowl trim side panel (1) from the vehicle.