LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Frame And Bumpers - 500 - Electric) >> Bumpers >> Reinforcement, Bumper, Front >> Removal

Reinforcement, Bumper, Front: Removal

WARNING: This page is about a different variant/trim than selected.
GC0153091Courtesy of CHRYSLER GROUP, LLC
  1. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
  2. Remove the fasteners securing the upper bumper reinforcement (1) to the frame/front end module. Repeat on the opposite side and remove the upper bumper reinforcement (1).
  3. Remove the fasteners securing the lower bumper reinforcement (2) to the frame/front end module. Remove the lower bumper reinforcement (2). If necessary, repeat on the opposite side.
scientia non olet · About LEMON Manuals