Handle, Front Recliner: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Before proceeding with the following procedure, review all Warnings and Cautions. Refer to SEATS, WARNING .
NOTE:
Passenger seat shown in the illustration. Driver seat similar.
- Remove the front seat being serviced and place it on a workbench. Refer to SEAT, FRONT, REMOVAL .
- Using Trim Stick (special tool #C-4755, Trim Stick) or equivalent, remove the trim cap (1) from the seat back recliner lever (2).
- Remove the screw (1) and washer (2) that secure the seat back recliner lever (3) to the seat and remove the lever.