Bezel, Instrument Panel, Heating And A/C: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the HVAC control bezel (2) into the vehicle.
2. Connect the wiring connectors to the multi media port (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Align the HVAC control bezel (1) to the instrument panel.
4. Push inward on the bezel (1) to engage the inner retainers.
5. Install the lower fastener (2) and tighten securely.

   Courtesy of CHRYSLER GROUP, LLC

6. Install the two upper fasteners (1) into HVAC bezel (2) and tighten securely.
7. Install the radio and radio controls. Refer to RADIO, INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

8. Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

9. Install the floor console (1). Refer to CONSOLE, FLOOR, INSTALLATION .

   .

10. Connect the negative battery cable.