Audio/Video/Entertainment/Connectivity (Service Information) - 500L: Radio: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Connect the antenna connectors (2).
2. Connect the radio electrical connector (1).
3. Insert the radio (3) into the instrument panel.

   Courtesy of CHRYSLER GROUP, LLC

4. Install and securely tighten the four mounting fasteners (1a).
5. Install the switch pod. Refer to POD, SWITCH, INSTALLATION .
6. Connect the negative battery cable.

NOTE:

The radio must be programmed after a radio replacement. Refer to MODULE, RADIO RECEIVER, MODULE PROGRAMMING .