LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.4L Turbo Engine (Service Information) - 500L >> Cylinder Head >> Valves, Intake And Exhaust >> Removal

Valves, Intake And Exhaust: Removal

  1. Remove the cylinder head. Refer to CYLINDER HEAD, REMOVAL .
    NOTE:

    The intake and exhaust springs are NOT interchangeable. Make the springs accordingly for installation. Correctly identify the part numbers for new springs being installed.

    NOTE:

    Number 2 cylinder exhaust valve spring shown, all other valve springs similar.

  2. Remove the valve spring(s). Refer to SPRING(S), VALVE, REMOVAL .
    GC0144259Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Before removing the valves, remove any burrs from the valve stem retainer lock grooves (2) and stem tip (1) to prevent damage to the valve guides.

  3. Remove the valve(s). Identify each valve to ensure installation in the original location.
    GC0155796Courtesy of CHRYSLER GROUP, LLC
  4. If required, remove the valve guide seal (2) and spring seat (3). Refer to SEAL(S), VALVE GUIDE, REMOVAL .
scientia non olet · About LEMON Manuals