LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Turbo Engine (Service Information) - 500L >> Valve Timing >> Cover(S), Engine Timing >> Installation

Cover(S), Engine Timing: Installation

GC0152659Courtesy of CHRYSLER GROUP, LLC
  1. Install the side timing belt cover (1) with bolt (2) tightened to 25 N.m (18 ft. lbs.).
    GC0152464Courtesy of CHRYSLER GROUP, LLC
  2. Install the lower timing belt cover (1) with bolt (2) tightened to 9 N.m (80 in. lbs.).
  3. Install the vibration damper. Refer to DAMPER, VIBRATION, INSTALLATION .
  4. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  5. Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  6. Install the right front wheel and tire assembly. Refer to INSTALLATION .
    GC0152466Courtesy of CHRYSLER GROUP, LLC
  7. Lower the vehicle.
  8. Install the upper timing belt cover (1) with two bolts (2 and 3) tightened to 9 N.m (80 in. lbs.).
    GC0155975Courtesy of CHRYSLER GROUP, LLC
  9. Engage the following retainers to the upper timing belt cover (1):
    • Wastegate solenoid pressure inlet hose (2).
    • After run coolant pump return hose (3).
    • Evaporative emissions purge hose (4).
    GC0176791Courtesy of CHRYSLER GROUP, LLC
  10. Install the turbocharger wastegate solenoid (3) and tighten the bolt (1) to 6 N.m (53 in. lbs.).
  11. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  12. Connect the negative battery cable.
scientia non olet · About LEMON Manuals