Cover, Seat Cushion, Front: Disassembly
NOTE:
Passenger seat shown. Driver seat similar.
- Remove the seat bottom cushion and cover from the seat bottom frame. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL .
- Fold the seat cushion cover (1) completely over to the top of the seat cushion (2).
- Remove the hog rings (2) that secure the seat bottom cover (1) to the seat bottom cushion (3).
- Remove the bottom cover (1) from the seat bottom cushion (3).
- If necessary, remove the Occupant Detection Sensor (ODS) from the passenger side seat bottom cushion. Refer to SENSOR, OCCUPANT DETECTION, REMOVAL .
- If necessary, remove and discard the heated seat pad from the seat bottom cushion. Refer to PAD, HEATER, REMOVAL .