Bezel, Instrument Panel, Heating And A/C: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
4. Remove the radio and radio controls.

   Refer to RADIO, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

5. Remove the two upper fasteners (1) from the HVAC control bezel.

   Courtesy of CHRYSLER GROUP, LLC

6. Remove the lower fastener (2).
7. Pull rearward on the bezel (1) to release the inner retainers.

   Courtesy of CHRYSLER GROUP, LLC

8. Disconnect the wiring connectors from the multi media port (1).
9. Remove the HVAC control bezel (2) from the vehicle.