Spark Plug: Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Number 1 cylinder ignition coil shown, all others similar.

Remove the ignition coil (3)
Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Prior to removing the spark plug, spray compressed air into the cylinder head opening. This will help prevent foreign material from entering the combustion chamber.
CAUTION:
The spark plug tubes (1) are a thin wall design. Avoid damaging the spark plug tubes. Damage to the spark plug tube can result in oil leaks.
Remove the spark plug from the cylinder head using a quality thin wall socket with a rubber or foam insert.
Inspect the spark plug condition.