LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500L Easy, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) 500L >> Lamp, Tail Stop Turn >> Removal >> Bulb

Lamp, Tail Stop Turn: Removal: Bulb

Fig 1: Socket Plate & Screws
GC0158862Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the rear lamp unit from the end of the quarter panel. Refer to LAMP .
  3. Remove the two screws (1) that secure the socket plate (2) to the back of the lamp housing.
  4. Pull the socket plate (2) straight out from the back of the lamp housing.
    Fig 2: Tail, Stop, Turn Bulb
    GC0158586Courtesy of CHRYSLER GROUP, LLC
  5. Firmly grasp the bulb (2) and pull the base of the bulb straight out of the socket plate.
scientia non olet · About LEMON Manuals