LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (DTCS P1CC0-00 To U1508-00 - C635 DDCT Automatic Transmission - 500L) >> Diagnosis And Testing >> U1460-00-Engine Idle Speed Message Rationality >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

When the CAN signal value is below a calibratable lower threshold or it exceeds a calibratable upper threshold or the signal is not available, the PCM sends a Signal Not Available (SNA) default value to the PCM. When the PCM reads one of these conditions then DTC U1460 is set.