LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (DTCS P1CC0-00 To U1508-00 - C635 DDCT Automatic Transmission - 500L) >> Diagnosis And Testing >> U1106-00-Can C Signal Missing >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

This diagnostic checks the status of the CAN communication between the TCM and the other nodes in the network. If the TCM, after its CAN transmission, does not receive acknowledgment flags from the CAN nodes for a calibrated amount of time, a "CAN MUTE" error, DTC U1106 is set.