Solenoid Valves Removal
- Remove the valve body from the transmission. Refer to VALVE BODY, REMOVAL .
- Place the valve body on a clean work surface supported on each end by wooden blocks with the outer half facing upward.
1 - Solenoid Retaining Plate Fasteners - Remove the fasteners holding the solenoid retaining plates to the outer valve body.
1 - Solenoid Retaining Plate - Separate the small solenoid retaining plate from the valve body.
1 - Solenoid Retaining Plate 2 - Notches on Center Dog Clutch Solenoids 3 - Index Tabs - Separate the large solenoid retaining plate from the valve body.
1 - Inner Valve Body 2 - Outer Valve Body 3 - Solenoid Valves - Position the valve body so the inner valve body is on top.
- Pull the solenoid valves straight out of the outer valve body.
1 - Parking Lock Valve 2 - Outer Valve Body - Remove the parking lock valve from the outer valve body.