LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 948TE/9HP48 Automatic Transmission (Service Information) (2 Of 2) >> Harness, Internal Wire >> Installation

Harness, Internal Wire: Installation

  1. Position the internal transmission wire harness onto on the valve body.
  2. Tighten the solenoid wire harness connector to the proper specifications. Refer to TORQUE SPECIFICATIONS .
  3. Connect the wire harness connector to the transmission fluid pressure transducer.
  4. Install the valve body. Refer to VALVE BODY, INSTALLATION .
  5. Perform Transmission Verification Test - 948TE. Refer to 948TE-9HP48 TRANSMISSION VERIFICATION TEST .
scientia non olet · About LEMON Manuals