Valve, Exhaust Gas RECIRCULATION (EGR): Removal
| 1 - EGR Tube Clamp |
| 2 - EGR Valve Nuts |
| 3 - EGR Valve |
| 4 - EGR Valve Wire Harness Connector |
- Remove the EGR tube. Refer to TUBE, EXHAUST GAS RECIRCULATION (EGR), CROSSOVER, INSTALLATION .
- Disconnect the Exhaust Gas Recirculation (EGR) valve wire harness connector.
- Remove the nuts and the EGR valve. DISCARD the gasket.
NOTE:
Perform EGR valve re-learn procedure if replacing with new.