LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Parking Brake >> Actuator, Electric Park Brake >> Removal

Actuator, Electric Park Brake: Removal

CAUTION:

If the Electric Park Brake (EPB) switch is actuated with the caliper removed from the caliper bracket and still connected electrically, the EPB motor will fully extend causing damage to the caliper piston. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.

  1. Place the Electric Park Brake (EPB) in maintenance mode. Refer to PARKING BRAKE, STANDARD PROCEDURE .
    GC0160639Courtesy of CHRYSLER GROUP, LLC
  2. Remove the battery access cover.
  3. Disconnect and isolate the negative battery cable (1).
  4. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0203832Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the EPB actuator wire harness connector (2).
  6. Remove the Electric Park Brake (EPB) actuator bolts (1) and remove the EPB actuator.
scientia non olet · About LEMON Manuals