Cable, Manual Park Release: Removal: Lower
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle
Refer to HOISTING, STANDARD PROCEDURE .
- Unclip the Manual Park Release (MPR) cable from the lever.
- Release the locking tab (1) on the MPR cable and remove the cable (2) from the bracket (3).
- Release the grommet from the body, and push the cable inward.
- Lower the vehicle.
- Remove the shifter bezel
Refer to BEZEL, SHIFTER, REMOVAL .
- Remove the center console left side bezel.
- Carefully pull the MPR cable through the body.