LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (6.2L Engine (Service Information)) >> Supercharger System >> TENSIONER, Drive Belt >> Removal

TENSIONER, Drive Belt: Removal

WARNING: This page is about a different variant/trim than selected.

DESIGN 1 

GC0170486Courtesy of CHRYSLER GROUP, LLC
  1. Retract the belt tensioner and position the supercharger drive belt (2) aside.
  2. Remove belt tensioner retaining bolt (3) and the belt tensioner.
  3. If necessary, remove the three mounting bracket bolts (1) and remove the bracket.

DESIGN 2 

GC0206562Courtesy of CHRYSLER GROUP, LLC
  1. Partially remove the supercharger drive belt. Refer to BELT, DRIVE, REMOVAL .
  2. Remove the bolt (2) and the belt tensioner.
  3. If necessary, remove the three mounting bracket bolts and the bracket.
scientia non olet · About LEMON Manuals