LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (6.4L Engine (Service Information)) >> Valve Timing >> Cover(S), Engine Timing >> Removal

Cover(S), Engine Timing: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the throttle body. Refer to THROTTLE BODY, REMOVAL .
  2. Remove the water pump. Refer to PUMP, WATER, REMOVAL .
    GC0209784Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the camshaft position sensor wire harness connector (1).
  4. Remove A/C compressor from the front timing chain cover and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
  5. Remove the generator from the front timing chain cover and position aside. Refer to GENERATOR, REMOVAL .
  6. Remove the vibration damper. Refer to DAMPER, VIBRATION, REMOVAL .
    GC0184543Courtesy of CHRYSLER GROUP, LLC
  7. Remove the five front oil pan to timing cover bolts (1).
    GC0184512Courtesy of CHRYSLER GROUP, LLC
  8. Remove the engine timing cover retaining bolts (1) and remove the engine timing cover.
    GC0209481Courtesy of CHRYSLER GROUP, LLC
  9. Verify that the engine timing cover slide bushings (1) remain located in the engine timing cover.
scientia non olet · About LEMON Manuals