Seat, Second Row: Removal

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Captains seats are similar to the full bench seat and use the following service procedures.

Remove rear door scuff plates. Refer to PLATE, SCUFF, LIFTGATE, REMOVAL .
Remove the 2nd row floor console, if equipped. Refer to CONSOLE, FLOOR, END CAP, REMOVAL .
Fold the rear seat backs down and remove the rear bolts (2) and nuts (1).

Courtesy of CHRYSLER GROUP, LLC
Fold the seat backs up.
Open the fasteners covers (1).
Remove the outer nuts (2) and inner bolts (3).

Courtesy of CHRYSLER GROUP, LLC
For bench seat, lift the seat cushion assemblies up and disconnect the electrical connectors (4), if equipped.
For bench seat, remove the inner bolts (1).
For bench seat, remove the bolt and separate the center buckle assembly (5).
Remove the outer bolts (2) and remove the seat from the vehicle.