Panel, Door Trim: Removal
- Remove the fasteners (2) and remove the map pocket (1).
- Using a (special tool #C-4755, Trim Stick) or equivalent, remove the speaker cover (1).
- Remove the fasteners (1) and remove the speaker (2). Disconnect the electrical connector.
- Remove the switch assembly (1) and disconnect the electrical connectors (2).
- Remove the release handle trim (1).
- Remove the interior door handle. Refer to HANDLE, INTERIOR, REMOVAL .
- Remove the pull cup liner (1).
- Remove the pull cup fastener (2) and fastener (3).
- Remove the fasteners (1 and 2).
- Remove the trim panel (1).
- Using a trim stick or equivalent, remove the lower trim (1).