LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Removal

Sensor, Oil Temperature: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the cowl extension. Refer to SILENCER, COWL EXTENSION, REMOVAL .
    GC0173564Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the oil temperature sensor wire harness connector (2).
    GC0173767Courtesy of CHRYSLER GROUP, LLC
  4. Remove the oil temperature sensor (1) from the cylinder head.
scientia non olet · About LEMON Manuals