Seal(S), Valve Guide: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

If the springs are to be reused, identify their positions so that they can be reassembled into their original locations.

Remove the valve spring(s). Refer to SPRING(S), VALVE, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Number 5 cylinder exhaust valve guide seal shown, all other valve guide seals similar.
Remove the valve guide seal (1) using a valve seal tool (2). Discard the removed seal.

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Number 5 cylinder exhaust valve spring seat shown, all other valve spring seats similar.
If required, remove the valve spring seat (1).
If required, remove the valve(s). Refer to REMOVAL