Lifter(S), Hydraulic: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

The LH cylinder head hydraulic lifters are shown, the RH cylinder head hydraulic lifters are similar.

Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
NOTE:
If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.
Remove the rocker arm(s). Refer to REMOVAL

Courtesy of CHRYSLER GROUP, LLC

NOTE:
If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.
The exhaust hydraulic lifters should have been removed (1) with the rockers arms, as they are attached with a retaining clip.

Courtesy of CHRYSLER GROUP, LLC
Remove the intake hydraulic lifter(s) (1).