Rocker Arm, Valve: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

The LH cylinder head rocker arms are shown, the RH cylinder head rocker arms are similar.

Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
NOTE:
If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

Courtesy of CHRYSLER GROUP, LLC
Remove the intake rocker arm(s) (1).
Remove the exhaust rocker arm and hydraulic lifter assembly (2).

Courtesy of CHRYSLER GROUP, LLC
The exhaust rocker arm (2) will come out as an assembly with the hydraulic lifter (3), as it is attached with a retaining clip (1).