Fascia, Front: Installation

Courtesy of CHRYSLER GROUP, LLC

If removed, install the grille onto the front fascia. Refer to GRILLE, REMOVAL .
Position the front fascia (1) and connect the wire harness connectors, if equipped.
Install the fascia, locking the integral latches at the wheel well openings (2).
Install the two upper retainers at top of the grille.
Install the four lower retainers (4).

Courtesy of CHRYSLER GROUP, LLC
Install the fasteners (3) that secure the wheel liners to the fascia.
Position the fender flare (1) on the fender.
Press evenly and firmly and secure the seven clips (2) that attach the flare to the fender, fully.
Install two new plastic rivets (4) that secure the fender flare to the fascia.