LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Air Conditioning Controls) >> Evaporator Temperature Sensor >> Installation

Evaporator Temperature Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the evaporator temperature sensor probe into the A/C evaporator.
  2. Install the access plate to the HVAC housing.
  3. Connect the wire harness connector to the evaporator temperature sensor.
  4. Install the blower motor resistor block (Refer to INSTALLATION  ).
  5. Install the blower motor (Refer to BLOWER MOTOR ).
  6. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals