LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Air Conditioning Controls) >> A/C Heater Control >> Installation

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the A/C-heater control onto the instrument panel center bezel and install the retaining screws. Tighten the screws to 2.2 N.m (20 in. lbs.).
  2. Connect the wire harness connectors to the A/C-heater control.
  3. Install the cluster bezel onto the instrument panel (Refer to CLUSTER BEZEL ).
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals