LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Overhaul - 42RLE Automatic Transmission) >> Solenoid/Pressure Switch ASSY >> Installation

Solenoid/Pressure Switch ASSY: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. Refer to STANDARD PROCEDURE--DRIVE LEARN .
  1. Install Solenoid/Pressure Switch Assembly and screen to the separator and transfer plates.
  2. Install and tighten retaining screws to 5.5 N.m (50 in. lbs.) torque.
  3. Install valve body. (Refer to INSTALLATION )
scientia non olet · About LEMON Manuals