LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Track-Front Bucket >> Installation

Seat Track-Front Bucket: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat track on the frame.
  2. Install the push nuts on the seat lever adjuster.
  3. Install the torx bolts attaching the seat track to the cushion frame and tighten to 24 N.m (17 ft. lbs.).
  4. Install the seat. (Refer to BODY/SEATS/SEAT-FRONT BUCKET-INSTALLATION  )
scientia non olet · About LEMON Manuals