LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Cushion Cover-Rear/Quad Cab >> Installation

Seat Cushion Cover-Rear/Quad Cab: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position cover on seat cushion.
  2. Roll cover onto cushion.
  3. Engage the hook and loop fasteners.
  4. Install the cup holder, if equipped.
  5. Engage the j-strap.
  6. Install rear seat. (Refer to BODY/SEATS/SEAT-REAR/QUAD CAB-INSTALLATION  )
scientia non olet · About LEMON Manuals