LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat-Rear/Quad Cab >> Installation

Seat-Rear/Quad Cab: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat on the cab back hooks and the floor studs.
  2. Feed the seat belt between the seat cushion and the seat back.
  3. Ensure the seat back is firmly hooked to the cab back retainers.
  4. Install the floor fasteners and tighten to 46 N.m (34 ft. lbs.).
    Fig 1: Removing Rear Seat Quad Cab
    G02655780Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals