Seat Cushion Cover-Front Bucket: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Position the cushion/cover on the frame.
- Engage the rear J-strap.
- Engage the front J-strap.
- Engage the side J-straps.
- Engage the rearward corner J-straps.
- Install the recliner handle.
- Install the seat. (Refer to BODY/SEATS/SEAT-FRONT BUCKET-INSTALLATION )
- Install the anchor bolt attaching the buckle to the seat track and tighten to 22 N.m (16 ft. lbs.).