LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Cushion Cover-Front Bench >> Installation

Seat Cushion Cover-Front Bench: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the cushion/cover on the frame.
  2. Route the seat belt/buckles through the access hole in the cushion cover.
  3. Engage the J-straps around the perimeter of the cushion.
  4. Install the push nuts on the seat adjuster lever.
  5. Install the bolts attaching the outer seat tracks to the cushion frame and tighten to 24 N.m (17 ft. lbs.).
  6. Install the seat. (Refer to BODY/SEATS/SEAT-FRONT BENCH-INSTALLATION  )
scientia non olet · About LEMON Manuals