LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat-Front Bench >> Installation

Seat-Front Bench: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position seat in vehicle.
    NOTE: Ensure each seat track is equally positioned in the full rearward position.
  2. Install the front bolts attaching seat track to floor pan and tighten to 27 N.m (20 ft. lbs.).
  3. Move seat to full forward position.
  4. Install rear bolts attaching seat track to floor pan and tighten to 46 N.m (34 ft. lbs.).
scientia non olet · About LEMON Manuals