LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Interior Trim) >> Shift Bezel >> Installation

Shift Bezel: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position shift bezel in vehicle.
  2. Engage 4WD shift indicator lamp connector, if equipped.
  3. Install screw under shift boot attaching patch plate to floor pan.
  4. Install bolts in cup holder attaching shift bezel to floor pan.
  5. Install shift boot(s). (Refer to BODY/INTERIOR/4WD FLOOR SHIFT BOOT-INSTALLATION  )
    Fig 1: Removing/Installing Shift Bezel 4X4 Automatic Transmission
    G02655764Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals