Window Regulator: Removal
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the door waterdam and speaker, if equipped. (Refer to BODY/DOORS-REAR/WATERDAM-REMOVAL )
- Remove the inner beltline weatherstrip. (Refer to REMOVAL )
- Remove the outer beltline weatherstrip. (Refer to REMOVAL \)
- Lower the door glass.
- Remove the bolts attaching the regulator to the glass.
- Raise the glass manually and secure in the door frame with tape or equivalent.
- Loosen the regulator attachment nuts and remove the regulator attachment bolts.
- Disengage regulator wire harness.
- Remove the regulator (Fig 1 ).