Section 64 (Doors - Rear): Hinge: Removal
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Remove B-pillar trim. (Refer to REMOVAL )
- Disconnect door wire harness connector.
- Support door on suitable stand.
- Using a grease pencil or equivalent, mark hinge position on B-pillar.
- Remove bolts attaching hinge to B-pillar (Figure ).
- Separate door from vehicle.
- Using a grease pencil or equivalent, mark hinge position on door.
- Remove bolts attaching hinge to door.