LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Doors - Rear) >> Hinge >> Installation

Section 64 (Doors - Rear): Hinge: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align and position hinge on door.
  2. Install bolts attaching hinge to door and tighten to 28 N.m (20 ft. lbs.).
  3. Align and position door on vehicle.
  4. Install bolts attaching hinge to B-pillar (Figure ) and tighten to 28 N.m (20 ft. lbs.).
  5. Adjust door as necessary. (Refer to BODY/DOORS-REAR/DOOR-ADJUSTMENTS  )
  6. Connect door wire harness connector.
  7. Install B-pillar trim. (Refer to INSTALLATION )