LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Interior Trim) >> B-Pillar Trim >> Installation

B-Pillar Trim: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position trim panel in vehicle.
  2. Route shoulder belt through access slots in B-pillar trim panel.
  3. Connect speaker harness connector, if equipped.
  4. Position B-pillar trim panel on B-pillar and press to seat push-in fasteners.
  5. Install shoulder belt turning loop.
  6. Install door sill cover as necessary.