Window Regulator: Removal
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Remove glass from door. (Refer to BODY/DOOR-FRONT/DOOR GLASS-REMOVAL )
- Disengage power window motor wire connector from door harness, if equipped (Figure ).
- Loosen bolts in slotted holes attaching regulator to door inner panel (Figure ).
- Remove bolts attaching window regulator to inner door panel.
- Extract window regulator through access hole in inner door panel.