LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Door - Front) >> Door Glass >> Removal

Door Glass: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove door trim panel. (Refer to BODY/DOOR-FRONT/TRIM PANEL-REMOVAL  )
  2. Remove water dam as necessary to gain access to glass regulator arm.
  3. Remove inner door belt weatherstrip. (Refer to REMOVAL )
  4. Remove outer door belt weatherstrip. (Refer to REMOVAL )
  5. Lower glass to full down position and align glass regulator arm with access holes in inner door panel.
  6. Remove front glass run channel. (Refer to BODY/DOOR-FRONT/GLASS RUN CHANNEL-REMOVAL  )
  7. Remove nuts attaching glass channel to regulator arm (Fig 1 ).
  8. Separate glass from regulator arm.
  9. Lift glass upward and out of opening at top of door.
Fig 1: Removing Nuts Attaching Glass Channel To Regulator Arm
G02655673Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals