Window Regulator: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Position regulator in door and align bolts with slotted holes in door inner panel.
Install bolts attaching window regulator to inner door panel and tighten to 9 N.m (80 in. lbs.).
Engage power window motor wire connector to door harness, if equipped.
Install glass in door. (Refer to BODY/DOOR-FRONT/DOOR GLASS-INSTALLATION )
Verify operation.

Fig 1: Disengaging And Engaging Power Window Motor Wire Connector From Door Harness
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Locating Power Regulator Bolts
Courtesy of DAIMLERCHRYSLER CORP.