Door Glass: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Slowly lower glass into door.
- Position glass in regulator arm.
- Install front glass run channel. (Refer to BODY/DOOR-FRONT/GLASS RUN CHANNEL-INSTALLATION )
- Install nuts attaching glass channel to regulator arm and tighten to 9 N.m (80 in. lbs.).
- Ensure glass is aligned in run channels and tighten run channel bolts to 9 N.m (80 in. lbs.).
- Install outer door belt weatherstrip. (Refer to INSTALLATION )
- Install inner door belt weatherstrip. (Refer to INSTALLATION )
- Reposition the water dam.
- Install door trim panel. (Refer to BODY/DOOR-FRONT/TRIM PANEL-INSTALLATION )