Section 63 (Door - Front): WATERDAM: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Apply an appropriate adhesive/sealant to the waterdam edges before installing it.
- Position the waterdam on the door inner panel and press it inward at the areas with the adhesive to attach it to the inner panel.
- Ensure that the retainer step pockets are position correctly in the door inner panel.
- Install the door trim panel. (Refer to BODY/DOOR-FRONT/TRIM PANEL-INSTALLATION )