LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Frame & Bumpers) >> Transfer Case Skid Plate >> Installation

Transfer Case Skid Plate: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position skid plate on vehicle.
  2. Install two rear bolts and tighten to 40 N.m (30 ft. lbs.).
  3. Install the front axle skid plate. (Refer to FRAME & BUMPERS/FRAME/FRONT SKID PLATE - INSTALLATION  )
scientia non olet · About LEMON Manuals